The Product
MULTIFIX T can be used to hold back slopes from 20% upwards with HYDROPACK® trays (ACROPACK solutions) and for Multilayer solutions (ACROMAT solutions).
It prevents the plant complex from slipping.
Available in stainless steel or wood.
MULTIFIX T cleats are fastened to the load-bearing element through the waterproofing membrane, then re-welded to the cleat assembly (to be carried out by the waterproofing contractor).
Its corners are rounded to avoid puncturing the waterproofing membrane.
Its height varies according to the thickness of the substrate.
The choice of complex depends on the characteristics of the project and is the subject of a Le Prieuré technical study.
Technical data
| MULTIFIX T | |
|---|---|
| Material | Stainless steel or wood |
| Cleat length | From 1 to 3 m |
| Available heights | 50, 75, 80, 100 mm |
| Cleat section width | MULTIFIX T 50: 50 mm
MULTIFIX T 75: 75 mm MULTIFIX T 80: 100 mm MULTIFIX T 100: 150 mm |
| Weight | MULTIFIX T 50: 2.1 kg/ml
MULTIFIX T 75: 3.5 kg/ml MULTIFIX T 80: 3.6 kg/ml MULTIFIX T 100: 4.5 kg/ml |
| Height of substrate to be used | Maximum 1 cm more than the height of the cleat, once the substrate has been compacted. |
